Advanced search

Tel: +44 (0)1404 44194 Email: enquiry@goonveanfibres.co.uk

Poly V-Belts

Elastomers

Fibres for Belts, Hoses & Anti - Vibration Mountings

Goonvean Fibres produces precision short cut fibers and fibre flocks in a variety of natural and synthetic fibres such as cotton, viscose rayon, nylon, polyester and aramids. These fibres are used to provide a flexible reinforcement for a range of rubber compounds used in the manufacture of transmission belts, seals, hoses and anti-vibration mountings. Our recently conducted case study focussed on quantifying the benefits of using our fibres in a rubber formulation. 5% of Goonvean Fibres PE60 ground polyester was added to a styrene butadiene rubber formulation and the physical properties measured. Addition of fibres resulted in an 11% increase in scorch time, 10% improvement in tear strength and a 7% increase in hardness. For more information, please download our sector brochure and case study using the 'download brochure' button below.

Drive Belts

Drive Belts

Drive BeltsGoonvean Fibres offers a range of milled flocks from 250 microns up to 12000 microns for use within a variety of drive belts such as V, Wedged, Cogged Raw Edge, Timing and High Torque belts. Typically, Polyester, Cotton and Nylon flocks are used as a flexible, easily dispersed, friction resistant reinforcement. Additional materials such Aramid Flocks can be substituted when extreme temperatures and excessive wear resistance are of paramount importance.

Click on the following links to view further information:

Goonvean Fibres can offer precision cut fibres (in continuous filament form) using rotary and guillotine cutters. Capable of cutting from 0.25mm up to 50mm. For further information please contact enquiry@goonveanfibres.co.uk

Short cut aramid fibres and flocks are widely used as reinforcement and process aids (pre-form production) in friction products where high temperature and wear resistance are important. Aramid fibres are also used by gasket and seal manufacturers for use in aggressive environments.

Natural fibres and fibre flocks such as cotton, hemp and other cellulosic-based fibres are increasingly used to reinforce products in a growing number of applications. Many global companies looking for less reliance on oil based synthetic flocks where precision cut lengths are less critical are investigating the use of an environmentally acceptable alternative.

Goonvean Fibres offers a polyethylene flock for use in a variety of applications including filtration, sealants, paints and rubber compounds.

Polyester flocks are used in the reinforcement of rubber formulations and provide improved initial modulus, compressive strength, bending stiffness and tear resistance.

Short cut aramid fibres and flocks are widely used as reinforcement and process aids (pre-form production) in friction products where high temperature and wear resistance are important. Aramid fibres are also used by gasket and seal manufacturers for use in aggressive environments.

Natural fibres and fibre flocks such as cotton, hemp and other cellulosic-based fibres are increasingly used to reinforce products in a growing number of applications. Many global companies looking for less reliance on oil based synthetic flocks where precision cut lengths are less critical are investigating the use of an environmentally acceptable alternative.

Polyester flocks are used in the reinforcement of rubber formulations and provide improved initial modulus, compressive strength, bending stiffness and tear resistance.

Goonvean Fibres offers a polyethylene flock for use in a variety of applications including filtration, sealants, paints and rubber compounds.

Aramid fibres and flocks are widely used as reinforcement and process aids (pre-form production) in friction products where high temperature and wear resistance are important. Aramid fibres are also used by gasket and seal manufacturers for use in aggressive environments.

Acrylic fibre flock is a polyacrylonitrile fibre used as an alternative to asbestos for the manufacture of brake pads and clutch plates. The fire resistant properties of the material also make it an ideal choice in intumescent applications such as paints and sealants.

Natural fibres and fibre flocks such as cotton, hemp and other cellulosic-based fibres are increasingly used to reinforce products in a growing number of applications. Many global companies looking for less reliance on oil based synthetic flocks where precision cut lengths are less critical are investigating the use of an environmentally acceptable alternative.

Polyester flocks are used in the reinforcement of rubber formulations and provide improved initial modulus, compressive strength, bending stiffness and tear resistance.

Goonvean Fibres offers a polyethylene flock for use in a variety of applications including filtration, sealants, paints and rubber compounds.

Resorcinol Formaldehyde Latex (RFL) coated Nylon is polyamide coated with RFL to improve adhesive properties of Nylon.

Short cut aramid fibres and flocks are widely used as reinforcement and process aids (pre-form production) in friction products where high temperature and wear resistance are important. Aramid fibres are also used by gasket and seal manufacturers for use in aggressive environments.

Goonvean Fibres offers a polyethylene flock for use in a variety of applications including filtration, sealants, paints and rubber compounds.

Capable of milling various materials from 250 micron up to 12,000 micron. If you have a requirement for commissioned milling please contact enquiry@goonveanfibres.co.uk

Rubber Hoses

High Pressure & High Temperature

Rubber HosesPolyester and Polyethylene flocks are used as a flexible, easily dispersed, friction resistant reinforcement in a variety of hoses. Aramid fibres can be substituted when extreme temperatures and excessive wear resistance are of paramount importance.

Click on the following links to view further information:

Goonvean Fibres can offer precision cut fibres (in continuous filament form) using rotary and guillotine cutters. Capable of cutting from 0.25mm up to 50mm. For further information please contact enquiry@goonveanfibres.co.uk

Short cut aramid fibres and flocks are widely used as reinforcement and process aids (pre-form production) in friction products where high temperature and wear resistance are important. Aramid fibres are also used by gasket and seal manufacturers for use in aggressive environments.

Natural fibres and fibre flocks such as cotton, hemp and other cellulosic-based fibres are increasingly used to reinforce products in a growing number of applications. Many global companies looking for less reliance on oil based synthetic flocks where precision cut lengths are less critical are investigating the use of an environmentally acceptable alternative.

Goonvean Fibres offers a polyethylene flock for use in a variety of applications including filtration, sealants, paints and rubber compounds.

Short cut aramid fibres and flocks are widely used as reinforcement and process aids (pre-form production) in friction products where high temperature and wear resistance are important. Aramid fibres are also used by gasket and seal manufacturers for use in aggressive environments.

Goonvean Fibres offers a polyethylene flock for use in a variety of applications including filtration, sealants, paints and rubber compounds.

Aramid fibres and flocks are widely used as reinforcement and process aids (pre-form production) in friction products where high temperature and wear resistance are important. Aramid fibres are also used by gasket and seal manufacturers for use in aggressive environments.

Acrylic fibre flock is a polyacrylonitrile fibre used as an alternative to asbestos for the manufacture of brake pads and clutch plates. The fire resistant properties of the material also make it an ideal choice in intumescent applications such as paints and sealants.

Goonvean Fibres offers a polyethylene flock for use in a variety of applications including filtration, sealants, paints and rubber compounds.

Resorcinol Formaldehyde Latex (RFL) coated Nylon is polyamide coated with RFL to improve adhesive properties of Nylon.

Short cut aramid fibres and flocks are widely used as reinforcement and process aids (pre-form production) in friction products where high temperature and wear resistance are important. Aramid fibres are also used by gasket and seal manufacturers for use in aggressive environments.

Goonvean Fibres offers a polyethylene flock for use in a variety of applications including filtration, sealants, paints and rubber compounds.

Capable of milling various materials from 250 micron up to 12,000 micron. If you have a requirement for commissioned milling please contact enquiry@goonveanfibres.co.uk

Rubber Mountings

Anti - vibration

Rubber MountingsPolyester and Polyethylene flocks are used as a flexible, easily dispersed, friction resistant reinforcement in anti - vibration mountings. Common applications are in engine mountings where vibration could reduce component life or result in catastrophic part failure.

Click on the following links to view further information:

Goonvean Fibres can offer precision cut fibres (in continuous filament form) using rotary and guillotine cutters. Capable of cutting from 0.25mm up to 50mm. For further information please contact enquiry@goonveanfibres.co.uk

Polyester flocks are used in the reinforcement of rubber formulations and provide improved initial modulus, compressive strength, bending stiffness and tear resistance.

Natural fibres and fibre flocks such as cotton, hemp and other cellulosic-based fibres are increasingly used to reinforce products in a growing number of applications. Many global companies looking for less reliance on oil based synthetic flocks where precision cut lengths are less critical are investigating the use of an environmentally acceptable alternative.

Goonvean Fibres offers a polyethylene flock for use in a variety of applications including filtration, sealants, paints and rubber compounds.

Natural fibres and fibre flocks such as cotton, hemp and other cellulosic-based fibres are increasingly used to reinforce products in a growing number of applications. Many global companies looking for less reliance on oil based synthetic flocks where precision cut lengths are less critical are investigating the use of an environmentally acceptable alternative.

Polyester flocks are used in the reinforcement of rubber formulations and provide improved initial modulus, compressive strength, bending stiffness and tear resistance.

Goonvean Fibres offers a polyethylene flock for use in a variety of applications including filtration, sealants, paints and rubber compounds.

Polyester flocks are used in the reinforcement of rubber formulations and provide improved initial modulus, compressive strength, bending stiffness and tear resistance.

Natural fibres and fibre flocks such as cotton, hemp and other cellulosic-based fibres are increasingly used to reinforce products in a growing number of applications. Many global companies looking for less reliance on oil based synthetic flocks where precision cut lengths are less critical are investigating the use of an environmentally acceptable alternative.

Goonvean Fibres offers a polyethylene flock for use in a variety of applications including filtration, sealants, paints and rubber compounds.

Resorcinol Formaldehyde Latex (RFL) coated Nylon is polyamide coated with RFL to improve adhesive properties of Nylon.

Goonvean Fibres offers a polyethylene flock for use in a variety of applications including filtration, sealants, paints and rubber compounds.

Capable of milling various materials from 250 micron up to 12,000 micron. If you have a requirement for commissioned milling please contact enquiry@goonveanfibres.co.uk

V-Belts

V-Belts

V-BeltsFibres are compatible with standard rubber processing techniques, mills, calendars and extruders, and fibre reinforced rubbers can be injection, transfer or compression moulded. Short cut fibres and flocks also improve the green strength of unvulcanised rubber and the hardness and/or modulus of vulcanised rubber. Polyester fibres and flocks are widely used to reinforce a number of products including raw edge V belts, timing belts and hoses.

Click on the following links to view further information:

Goonvean Fibres can offer precision cut fibres (in continuous filament form) using rotary and guillotine cutters. Capable of cutting from 0.25mm up to 50mm. For further information please contact enquiry@goonveanfibres.co.uk

Polyester flocks are used in the reinforcement of rubber formulations and provide improved initial modulus, compressive strength, bending stiffness and tear resistance.

Resorcinol Formaldehyde Latex (RFL) coated Nylon is polyamide coated with RFL to improve adhesive properties of Nylon.

Capable of milling various materials from 250 micron up to 12,000 micron. If you have a requirement for commissioned milling please contact enquiry@goonveanfibres.co.uk

backtotop