Advanced search

Tel: +44 (0)1404 44194 Email: enquiry@goonveanfibres.co.uk

Cutting Edge Fibre Technology, Goonvean Fibres is the world largest TS 16949 manufacturer of Fibre for Lead Acid Batteries
IATF 16949 ISO 9001

Aramid Synthetic Fibres

Para & Meta Flocks

Aramid fibres and flocks are widely used as reinforcement and process aids (pre-form production) in friction products, gaskets and seals. The end use will determine the grade and type of material required.

Milled (flock), Aramid Synthetic Fibres

Milled (flock) Aramid Synthetic Fibres

Milled (flock), Aramid Synthetic FibresMilled fibres also known as random length or ground flocks are routinely used to improve the properties of a wide range of industrial products. The addition of a controlled amount of these flocks can achieve a number of benefits. For example, milled fibres can reinforce and add strength to a product while drying, curing or vulcanising, as well as preventing the formation of micro cracks, which ultimately reduce the integrity of a product. Milled fibre products also contribute towards the strength, toughness and abrasion resistance of the finished product.

Click on the following links to view further information:

< 500 microns

Short cut aramid fibres and flocks are widely used as reinforcement and process aids (pre-form production) in friction products where high temperature and wear resistance are important. Aramid fibres are also used by gasket and seal manufacturers for use in aggressive environments.

500 - 1000 microns

Short cut aramid fibres and flocks are widely used as reinforcement and process aids (pre-form production) in friction products where high temperature and wear resistance are important. Aramid fibres are also used by gasket and seal manufacturers for use in aggressive environments.

1001 - 5000 microns

Aramid fibres and flocks are widely used as reinforcement and process aids (pre-form production) in friction products where high temperature and wear resistance are important. Aramid fibres are also used by gasket and seal manufacturers for use in aggressive environments.

> 5000 microns

Short cut aramid fibres and flocks are widely used as reinforcement and process aids (pre-form production) in friction products where high temperature and wear resistance are important. Aramid fibres are also used by gasket and seal manufacturers for use in aggressive environments.

backtotop

© Goonvean Fibres, 2011. All rights reserved.

Registered in England: No. 4735337

Designed & developed by Ayrmer Software Limited